|
The wide range of devices offered by our company enables the
user to examine all important phenomena occurring in one-phase and
three-phase networks. The devices and instruments measure and register :
current, voltage, powers, power factors, energies, harmonics distortion
factors harmonics, pulsation factors, voltage drops and breaks and tens of
other parameters.
The collected data can be printed on the printer or
transmitted to the PC computer for further processing. Registering devices
we manufacture as a standard are equipped with the software enabling
wide-range analysis of measured parameters, with the particular regard for
needs of the professional power engineering.
Moreover in our offer one
can find a wide choice of clamp-type current transformers and flexible
loop current probes which can be used together with the above described
registering and analyzing devices.
In order to be able to review information cards of our
products in PDF format you need the program: 
!NEW!
Registering devices for electrical parameters type
REM-211 and REM-221
|
|
The registering devices are manufactured as portable; they
enable measurement and registration of basic electric parameters in
three-phase low voltage systems. REM-211 it is the registering
device for rms values of phase voltages and frequency, while
REM-221 registers additionally rms values of phase currents,
active powers, reactive powers and active energies independently for each
of the phases. Registering devices monitor, store in memory and
analyze events occurring in the network in order to detect disturbances,
diagnose failure states, determine the reasons for failure states etc.
besides they can average measurement results, which is necessary for the
supply quality assessment done in the conformity with the EN 50160
standard. Software solutions enable the automatic generation of the
relevant supply quality assessment report. Construction of both
devices enables their installation directly on the pillar, in the place
where the measurements are carried out.
Full technical data can be
found in information leaflet.
These devices are particularly useful for:
-
Detecting illegal electrical energy inputs.
-
Checking and monitoring quality of supplied electrical energy.
-
Analyzing demand for electrical energy.
-
Preventing overheating of insulation of cables and conductors.
-
Detecting breaks and overvoltages in the network.
-
Measuring starting currents for various devices and
apparatuses.
Special housing with high
leaktightness enables installation of these devices directly on the
pillar in the place where measurements are carried
out.
Download the
information card in *.pdf format
Load the
information card in PDF format for clamp-type transformers and flexible
loop current probes designed for using together with REM-221 registering
devices.
Power supply quality analysing device with harmonics analysis
type REM-370
|
SELECTED TECHNICAL DATA: |
| Measurements in conformity with standard: |
EN 50160 or standard defined by user ! |
| Number of phases: |
1 or 3 |
| Memory capacity: |
3MB |
| Interface: |
RS-232 optic interface |
| Power supply: |
110, 230 lub 380V from measuring conductors |
| Reserve supply: |
from battery of accumulators |
| Operation without power supply: |
2hours (memory 1 year) |
| Housing protection: |
industrial, IP52 |
| Measurements: |
137 x 132 x 138mm |
This modern device can register several hundred network
parameters and examine energy quality in accordance with EN 50160
standard. Especially interesting are unique features of this device
such as detection of micro-breaks in power supply, change in the
recording speed and in the memory record configuration after exceeding
some preset limit value or statistic classification of average values.
Full specification of registered parameters is included in the information
card of the device. Moreover the device can be used together with
optional miniature printer (which does not require external PC
computer for its operation). This printer can print the report of supply
quality conformance with EN 50160 standard or the report of measured
parameters momentary values, without interrupting the registration of
measurements results into the device memory.
Download the
information card in *.pdf format
Load the
information card in PDF format for clamp-type transformers and flexible
loop current probes designed for using together with REM-221 registering
devices.
Download mini
printer MDI-57 information card in *.pdf format
Multi-phase meter for voltage breaks duration LCZN-01
|
WYBRANE DANE
TECHNICZNE |
| Ilość monitorowanych linii: |
9 |
| Pojemność liczników: |
9999,99 godzin |
| Zabezpieczenie kasowania liczników: |
kod czterocyfrowy |
| Częstotliwość testu napięcia: |
co 1s |
Multi-phase meter for voltage breaks duration LCZN-01
is designed for monitoring supply continuity (voltage presence) in low
voltage networks.
This device monitors independently up to nine lines
(three 3-phase four-conductor circuits or nine 1-phase circuits),
indicating the duration of normal line operation (when U>150 V) and the
duration of voltage drops and breaks in supply U<150 V) on two separate
6-digit displays.
On the basis of these indications one can asses the
performance efficiency of technical services responsible for the energy
supply continuity, and by this mobilize them to react fast for all the
arising problems, which leads to minimizing losses caused by breaks in
electrical energy supply. It is also possible to use this device for
registering and controlling work time of machines in
industry.
Resetting the counters is possible after entering four-digit
access code.
The meter has got the convenient module-type housing
enabling its fast installation on the standard DIN-bus. Download the
information card in *.pdf format
|
